INITIAL SETUP
Clear BD-Live Memory: Erases BD-Live bookmarks (which allow
discs to resume play after being paused) and any content downloaded
from the Internet.
Software Version: This item is informational only.
DivX Registration: This setting shows your personal DivX Video On
Demand (VOD) code. This code allows you to rent and purchase
videos using the DivX VOD service. For more information, visit www.
divx.com/vod. Follow the instructions and download the video onto a
disc for playback on this unit. Note that all the downloaded videos from
DivX VOD can only be played back on this unit. Once the DivX icon is
highlighted, press OK to access your personal DivX VOD code.
Reset Settings: Select to clear all user settings and return the
BDP 10 to its factory defaults.
When you have finished, use the
⁄
/
¤
/
‹
/
›
Buttons to navigate to
another Setup menu, or press the Setup or Clear Button to clear the
menus from view.
Step Seven – Network Setup
This menu allows you to control Internet access from the BD-Live
function. To use the BD-Live Internet access function, program your
home network’s settings into the Network Setup menu.
BD-Live Web Access: The default is to always allow the BDP 10
to access the Internet when the BD-Live function is activated while a
compatible disc is playing. Select “Prohibit” to never allow access to
the Internet, or select “Limit” to display a popup box that will ask the
viewer to allow Internet access for that disc.
A USB drive with at least 1GB capacity is required for BD-Live
functionality. Select the "Storage" option in the USB Function Select
menu.
Select the Test Connectivity line. If the test runs successfully, leave the
other settings as is; BD-Live Internet access will be available when you
play a compatible disc.
If the BDP 10 is not able to access the Internet, you may have to
manually change some of the settings. Navigate to the IP Mode line
and select “Manual”. A popup screen will appear with the current
network settings. Contact your Internet service provider for the
information required and change the settings accordingly. Highlight the
setting and press the OK Button. A dialog box will appear, prompting
you for the new Internet address. Use the Numeric Keys to enter each
field of the address. If the address contains three digits, the cursor will
automatically advance to the next field. When fewer than three digits
are used, press the
›
Button to advance the cursor. Press the
‹
Button to return to a previous field if corrections are required. When
the complete address has been entered, press the
›
Button to finish
the entry.
If you have installed a router to create a home network, consult the
instructions or Web site for the router to obtain the information.
This completes the setup process. Press the Setup Button to clear the
Setup menus from the screen.
To Next Page
Loading...
