Harman Kardon CA260 - Specifications

Congratulations on your purchase of a Harman Kardon CA260
High Fidelity Car Amplifier.
The CA260 is the result of an extensive engineering project
to create the finest automotive high fidelity product available.
It is superior in performance and has the ability to operate under
extreme environmental conditions.
To fully understand the CA260's capability, please read this
manual carefully and follow all of the instructions regarding its
use and installation.
Power Output, RMS
60 watts per channel into 4 Ohms,
20
- 20,000Hz
: 90 watts per channel into 2 Ohms,
20
- 20.000Hz
. 180 watts bridged mono into 4 Ohms,
20- 20,000Hz
HCC (High Instantaneous Current
. 230A
Capability)
THD (4 Ohms12 Ohms)
: No more than 0.1 %10.2%
Negative Feedback
: 25dB
Power Bandwidth
. 10Hz to 100,000Hz
Frequency Response 10Hz to 100,000Hz + 0, - 3dB
Signal-to-Noise Ratio
: 80dB
lnput Sensitivity
L~ne Level
: 0.1V10.5V (switchable)
High Level
: 1V
Active Crossover Characteristics
High Pass
. 200Hz, 12dBlOctave
Low Pass
: 200Hz, 6dBlOctave
Power Supply
. DC +13.8V (11 -16V usable),
negative ground
Typical lnput Current
Requirements
At Idle . 2.5A
Full Power MUSIC S~gnal
6 7A (4 Ohmslch.)
10A
(2 Ohrnsich 1
Full Power Sine Wave
. 20A (4 Ohmslch I
30A (2 Ohrnslch.)
Dimensions (W
x H x D)
. 15-518" x 3-718'' x 7-1!8"
(396x98~180 rnm)
We~ght
. 1Olbs. 202. 14.6kgl
All specifications arltf features subject to change w~rhour nonce
Accessories
Spare Fuse I1 pc I
Spade Lug with Tube (10 pcs
Power Cord (Red) (1 pc
1 Installation Template (1 pc.)
Ground Cord (Black1 (1 pc )
Mounting Screws and Washers (1 set)