Harman Kardon CITATION TOWER - POWERING ON THE CITATION TOWER

10
/ POWER ON
NOTES:
• Use the provided power cord only.
• When you disconnect the power cord, always pull the plug, never
the cable.
1) Plug one end of the AC power cord into the POWER
connector on the bottom of each speaker, then plug the
other end to a live AC (mains) outlet.
Æ The speaker will automatically power on and the touch
screen will turn on.
Secondary Primary
POWER
POWER
2) Select your language as instructed on the touch screen of
theprimaryspeakerfortherst-timesetting.
3) Press “MUSIC” to operate as standalone stereo speakers or
“VIDEO” to operate as a pair of satellite speakers (See the
“SPEAKER SETUP” section for details).