Harman Kardon DC5300 - Remote Control and System Linking

UL FILE NO. £28148
AUDIO EQUIPMENT
LISTED 5960
SERIAL NO.
AG 20W/60H2
Remote Control Rear Panel Jacks
1. If you wish to control your deck
through an external infrared remote
sensor: connect the wire from the
remote sensor to the “Remote Input”
jack on the deck.*
use a universal remote control unit,
such as Harman Kardon’s
Masterworks (TM), which can also
control other components, such as
TV’s, VCR’s, receivers, and CD
players. Masterworks is available from
your Harman Kardon dealer.
DC5300 does not come with its own
remote control. Also, the remote
control unit included with some
Harman Kardon receivers will control
some of the dual deck functions.
Consult your Harman Kardon dealer
for more information.
To control the deck, you may use the
remote control unit supplied with your
cassette deck. Alternatively, you may
3.
Connection to other stereo
components.
a.) To control additional components
through the external sensor: run a
control wire from the “Remote Output”
jack on your deck to the “Remote
Input” jack of another component.
Continue this process to include
multiple components.”
b.) Even if you do not use an external
sensor: you may still wish to connect
your deck to another component, if you
have one with a “Remote Input” jack
but with no other built-in remote
sensor. In this case, you may use the
built-in sensor in your deck to control
the other component.*
* NOTE: Not all components are
compatible. However, it will not hurt to
experiment.