Harman Kardon DC5300 - Remote Control Operation; Remote Control System Overview; Remote Control Button Functions

(DC5500 & DC5700 only.) The control unit
includes buttons that function the same
way as the corresponding keys on the
cassette deck.
Display
The Display button does not appear on the
deck itself. It is used to control the
fluorescent display on the deck. Its default
setting leaves the display illuminated on the
deck. Press the button once and all
settings extinguish, except the indicator for
the transport that is currently in use and its
operation. Press the button again and all
indicators are extinguished. Press the
button a third time and the display returns
to default mode.
Dual Rec
The two buttons marked Dual Rec are
pushed simultaneously to begin the Dual
Record function, available on the DC5700
only.
REMOTE CONTROL
Operation
The control unit operates effectively within
7 meters (23 feet) and within an angle of
30-degrees from the cassette deck. Using
the control unit near fluorescent lights may
shorten this range, as will any dust or dirt
that is allowed to accumulate on the front
end of the remote control, or the “Remote
Sensor” area of your deck. Also avoid
blocking the line of sight between cassette
deck and remote.
The control unit is powered by two AA
batteries, included with your cassette deck.
When you replace weak batteries, replace
both at the same time. When the remote is
to be unused for an extended period,
remove the batteries to prevent damage
from corrosion.
harman/kardon
Dual Cassette Deck
ai ec Edit Auto Pause
Hi-Speed
Display Copy Copy Sync Rev
Transport
Dolby NR_ MPX Filter Select
C)
Music
Reset Memory intro Search
C)
Rec Mute — Dir Mode _
Stes
a ee ct
Rec/Pause