Harman Kardon Enchant Series - Harman Kardon Hotel Mode; Hotel Mode Features Description; How to Enable Hotel Mode; How to Disable Hotel Mode

HK_Enchant Soundbars _Demo Mode and Hotel Mode Instructions_V1_20180727
HOTEL MODE
Description
1. Hotel mode will remain active, even after power cycle
2. Installer can dene the default source input when the product is turned on after standby
mode. A user can change the source at any time during operation.
3. Installer can dene the maximum volume level
4. The soundbar assumes a comfortable listening level when powered on.
To Enable Hotel Mode
1. Press and hold the remote control DIM button for 3 seconds, then quickly press SKIP BACK,
then SKIP FORWARD. The Display will show “Hotel”.
2. The soundbar will enter subwoofer-pairing mode. If connecting to a subwoofer, press the
PAIRING button on the subwoofer to connect.
3. The display will show “choose default source”. Press the SOURCE button on the remote control
or top-panel, then press the POWER button to conrm.
4. The display will say “set max volume”. Press the VOLUME UP and VOLUME DOWN buttons to
set the maximum volume, then press the POWER button to conrm.
5. Front display will display “READY” to indicate that the bar is in Hotel mode.
To Disable Hotel Mode
Repeat the Steps to Enable Hotel Mode