To Next PageTo Next PageWhy does my Harman Kardon FL8385 CD Player sound skip or stutter?
If your Harman Kardon CD Player exhibits skipping or stuttering during playback, the disc you are using might be damaged, so try another disc. Alternatively, the unit may be subject to surface vibrations. To resolve this, isolate the unit from vibration by placing it on a firm surface or move it further away from speakers.
Why does the Harman Kardon FL8385 remote not work?
If the remote for your Harman Kardon CD Player doesn't seem to be working, there are a few potential reasons. First, check if the Main Power Switch is turned off and turn it on. Second, weak batteries can cause the remote to malfunction, so install fresh batteries, making sure to observe the correct polarity. Finally, ensure that nothing is blocking the sensor on the front panel. If there are obstructions, remove them, or consider connecting a remote sensor to the Remote Control Input jack on the rear panel.
What to do if Harman Kardon CD Player lights are on but the CD doesn't play?
If your Harman Kardon CD Player's front panel lights are on, but the CD won't play, there are a couple of things to check. First, make sure the disc is loaded correctly with the label side facing up. If the disc is correctly oriented, there may be moisture inside the unit. Leave the unit turned ON for 30 minutes to allow any moisture to evaporate.
Why is the sound distorted on my Harman Kardon CD Player?
If the sound from your Harman Kardon CD Player is continually distorted, it might be connected to the wrong input. Make certain that the CD player is connected to a line-level audio input, and NOT a digital audio or phono input.
What to do if my Harman Kardon FL8385 CD Player has play indicator lights but no sound?
If you're experiencing a situation where the play indicator lights are on but you can't hear any sound from your Harman Kardon CD Player, there might be a few things to check: 1. Ensure that your receiver or preamp and amp are turned on. 2. Verify that all connections are secure and properly connected to the correct input (e.g., CD). 3. Make sure that you've selected the CD source on your receiver or preamp.
How to fix a Harman Kardon FL8385 CD Player with no lights on the front panel?
If there are no lights on the front panel of your Harman Kardon CD Player, the most likely cause is that it's not receiving power. Make certain that the AC power cord is plugged into a live outlet.
General| Type | CD Player |
|---|---|
| Manufacturer | Harman Kardon |
| Model | FL8385 |
| Channels | 2 (Stereo) |
| Frequency Response | 20Hz - 20kHz |
| Weight | 5.5 kg |
| Output Voltage | 2V RMS |
Essential safety guidelines for handling laser components.
Warnings about electric shock, moisture, and static discharge protection.
Procedures for safely handling the laser pickup and workbench setup.
Details on signal format, analog output, headphone, and general unit specs.
Specifications related to performance on various test discs.
Explanation of buttons and functions on the front panel.
Description of indicators and data shown on the unit's display.
Details on the rear panel input and output ports.
Operation and functions of the remote control unit.
Common symptoms, causes, and solutions for operational issues.
Step-by-step diagnostic procedures for common problems.
Visual breakdown of unit and mechanism parts with lists.
Overall system architecture and signal flow representation.
Datasheets, pin assignments, and block diagrams for key ICs.
Procedures for testing frequency response, THD, SNR, etc.
