Harman Kardon FL8385 - Technical Specifications; Audio and Unit Specifications; Test Disc Performance

TECHNICAL SPECIFICATIONS 15
FL8385 TECHNICAL SPECIFICATIONS
Signal Format
Sampling Frequency 44.1kHz
HDCD Processing Burr-Brown™ PCM1732
D/A Conversion Dual 18-Bit
Oversampling 8 Times
Discrete Analog Output Section
Error Correction CIRC System
Frequency Response 20Hz – 20kHz +0, –1dB
THD (1KHz) <0.02% @1kHz (30KHz Filter)
THD) (1KHz) <0.02% @1kHz (No Filter)
THD 20Hz~20KHz 0dB <0.02% @1kHz (30KHz Filter)
Dynamic Range >97dB
S-Noise Ratio 0dB A-weighted (A Filter) >97dB
Channel Separation 1KHz 0dB (30KHz Filter) 80dB
Channel Balance ±0.5dB
De-emphasis (5KHz,16KHz) ±0.5dB
Line-Level Output (no HDCD) 1.0 Vrms ±1dB
Line-Level Output (HDCD Output) 2.0 Vrms ±2dB
Digital Output Coax
Headphone output specification under 32 ohm load
Maximum Headphone Output Level 1KHz 0dB 1.5Vp-p
Frequency Response (20~20KHz) ±1dB
THD 20~20KHz 0dB (30KHz Filter) 0.1%
Test Disc Specification
Typical Limit
Black Dot TCD 725B 1000um 600um
Interruption MCD-131 900um 600um
Finger print 75um 65um
Vertical Deviation MCD-151 0.92mm 0.92mm
Eccentricity TCD 712 40um 140um
8cm test disc TCD 783 Last Track Last Track
Access Time 1st to last track YEDS18 4 sec 10 sec
General
Power Requirement 120V/60Hz
Power Consumption ≈20 Watts
Dimensions Height 5.1" (129mm)
Width 17.3" (440mm)
Depth 15.2" (386mm)
Weight 14.5 lb (6.6kg)
Depth measurement includes knobs and buttons. Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
FL8385
harman/kardon
4