FUNCTION DESCRIPTION
Tracking System
The tracking error output of E and F is given to Pin 25 (TEOUT). C8 is required for
oscillation-proof. R10 is chosen such that TEOUT of Pin 25 become 1.4Vp-p.
During alignment procedure, the DSP IC (MN662790) will adjust the tracking balance
voltage V
TBAL
from Pin 31. V
TBAL
varies with reference to the center voltage V
REF2
(=1.65 V)
within ±0.5 V.
The tracking gain will change according to the type of disc. For normal disc or CDR disc,
V
GCTRL
is set to V
REF2
; for CDRW disc V
GCTRL
is set to V
REF2
- 0.75 V. At the same time, the
focus gain is changed too.
A B
C D
F
PDIC
E
To Next Page
Loading...
