Harman Kardon HK3475 - Front-Panel Information Display; Understanding Display Indicators

FRONT-PANEL INFORMATION DISPLAY
FRONT-PANEL INFORMATION DISPLAY 7
MEMORY PRESET
SLEEP
AUTO
VMAx
MUTE T-MON
TUNED ST
A
B
DE
K
F
H
I
J
C
G
A VMAx Mode Indicator
B Preset Number/Sleep Timer
C Preset Indicator
D Sleep Indicator
E Memory Indicator
F Stereo Indicator
G Tuned Indicator
H Auto Indicator
I Main Information Display
J Tape Monitor (T-Mon) Indicator
K Mute Indicator
A VMAx Mode Indicator: This indicator lights when
the VMAx mode is in use. (See page 14 for a descrip-
tion of the VMAx Mode.)
B Preset Number/Sleep Timer: When the tuner is
in use, these numbers indicate the specific preset
memory location in use. (See page 15 for more infor-
mation on preset stations.) When the Sleep function is
in use, these numbers show how many minutes
remain before the unit goes into the Standby mode.
C Preset Indicator: This indicator lights when the
tuner is in use to show that the Preset Number/
Sleep Timer B is showing the station’s preset
memory number. (See page 15 for more information
on tuner presets.)
D Sleep Indicator: This indicator lights when the
Sleep function is in use.The numbers in the Preset
Number/Sleep Timer Indicators will show the minutes
remaining before the HK 3475 goes into the Standby
mode. (See page 14 for more information on the
Sleep function.)
E Memory Indicator: This indicator flashes when
entering presets and other information into the tuner’s
memory.
F Stereo Indicator: This indicator lights when an FM
station is being tuned in stereo.
G
Tuned Indicator: This indicator lights when a sta-
tion is being received with sufficient signal strength to
provide acceptable listening quality.
H Auto Indicator: This indicator lights when the
tuner’s Auto mode is in use.
I Main Information Display: This display shows
messages relating to the status, input source, tuner or
other aspects of the HK 3475’s operation.
J Tape Monitor (T-Mon) Indicator:When used
with three-head cassette decks, or other recording
devices that offer immediate playback of the recording
as it is being made, the HK 3475 allows you to moni-
tor a recording rather than merely listening to the input
source, or waiting until the recording session is com-
plete in order to hear the recording. Press the Tape
Monitor Input Selector 9ç, and the T-Mon
Indicator J will light to remind you that you are
monitoring the recording. Press the Tape Monitor
Input Selector 9ç again to hear the input source.
K Mute Indicator: This indicator lights to remind
you that the HK 3475’s output has been silenced by
pressing the Mute Button 5®. Press the Mute
button again to return to the previously selected
output level.