Harman Kardon HK3500 - Remote Control Operation; Independent Remote Control Functionality; Operating Conditions and Battery Care

REMOTE CONTROL
harman/kardon
R e c e
t
v
e
Independent Remote Control
The keys on the remote control unit function
the same as the corresponding buttons on
the receiver itself, except for the power
switch.
The power switch on the receiver turns the
unit On and Off. The switch on the remote
control switches the receiver from On
(green LED illuminates on receiver power
switch) to Standby (amber LED), as follows.
When power is On, pressing the power
switch on the remote control puts the
receiver in Standby mode. From this mode,
the receiver can be turned back on from the
remote control.
When power is Off, the receiver can be
turned on only from the unit itself, not from
the remote control.
Operating Conditions
The control unit operates effectively within a
distance of 7 meters (23 feet) and an angle
of 30° from the receiver. Using the control
near fluorescent lights may shorten this
range, as will any dust or dirt that
accumulates on the front of the remote
control, or the “Remote Sensor’ area of the
receiver. Also avoid blocking the line of
sight between receiver and remote.
The control unit is powered by two AA
batteries, included with your receiver.
When you replace weak batteries, replace
both at the same time. When the remote is
to be unused for an extended period,
remove the batteries to prevent damage
from corrosion.
10