Harman Kardon HK3500 - Specifications

SPECIFICATIONS
Tuner Section: FM
amplifier Secti
Continuous Average Power Per Channel (FTC) 8 Ohms: 50 Watts @<0.09% THD Usable Sensitivity Mono (dBf): ; _ 11.2
20Hz - 20kHz, Both Channels Driven 4 Ohms: 50 Watts @<0.3% THD 50dB Quieting Sensitivity, stereo (dBf): 37.2
Dynamic Power (IHF, 1kHz tone burst) Signal-to-Noise Ratio @ 65dBf, mono/stereo: 80dB/73dB
High Voltage/High Current Mode: 8 Ohms: 90 Watts Capture Ratio: 1.50B
4 Ohms: 120 Watts Selectivity, Adjacent/Alternate Channel: 10dB/75dB
2 Ohms: 160 Watts IF Rejection: 7 - 90dB
High Current Mode: 4Ohms:-<90Watts.~—=~=<“‘“‘é;~*!”*#*#CM RO @ BE OS—SS—S—SS—SSC“<“_ OBS
2 Ohms: 120 Watts Stereo Separation @ 1kHz, 65dBf: 0s | =
High Instantaneous Current Capability (HCC): +35 Amps THD @ 1kHz, 65dBf; mono/stereo (%): 0.1/0.12
Negative Feedback: 26dB
Power Bandwidth @ half-rated output, 8Q: <10Hz - 100 kHz Tuner Section: AM
Frequency Response @ 1W (+0/-3dB): 0.5Hz - 150kHz Sensitivity, Ext. Antenna: 15yV
Slew Rate:* 100V/u sec Alternate Channel Selectivity: 60dB
Rise Time: 1.8u sec Image Rejection: 40dB
Transient Intermodulation Distortion (TIM): Unmeasurable IF Rejection: ~60dB
Damping Factor: 60
Signal-to-Noise Ratio (ref. rated power Phono (MM): 78dB Dimensions: 17-3/8 x § x 13-3/4”
output, A-Wtd.) Video/CD: 98dB (Width x Height x Depth) 443 x 126 x 349mm
Input Sensitivity/Impedance Phono (MM): = 2.2mV/47kQ,125pf Weight: 16.5lbs./7.5kg
wideol CDi Vaper ISomvigens All features and specifications are subject to change without notice.
Subwoofer Output Level/Load: 2.0V/10kQ
Phono-Overload, MM: 120mV
RIAA EQ Accuracy 20Hz-20kHz: +0.5dB
Tone Control Range, Bass @ 50Hz/Treble @ 10kHz: +10dB/+10dB
Loudness Contour @ -40dB, 50Hz: +10dB
* Measured without input anti-slewing and output isolation networks.
14