Harman Kardon HK620 - Indicators and Remote Control; Independent Remote Control; Operating Conditions

INDICATORS and REMOTE CONTROL
Independent Remote Control
The keys on the remote control unit
w_ Volume function the same as the corresponding
buttons on the amplifier itself.
The remote control unit also includes
many keys that allow for easy control of
other Harman Kardon cassette tape
al C4
Seek-St Shift
2 a deck, CD player and tuner.
Indicates that the unit Indicates which function CIC) Please refer to the owner’s manual for
is switched on. is selected. 5 ch each unit for operating instructions.
ra ‘ C) Some of these units must be connected
pees a e aa to the amplifier's remote control output
‘ jacks so that the system remote control
can operate them.
” ape {Copy co Aux q w Tuning a
ina teeth
Headphones Speakers
Operating Conditions
1 2
O O ©) ToveSaien Torer Video CL] = 5 The control unit operates effectively
; 4 within a distance of 7 meters and an
: harman/kardon angle of 30° from the amplifier. Using the
i en ait control near fluorescent lights may
i } shorten this range, as will any dust or
& Remote Sensor i dirt that accumulates on the front of the
4 } remote control, or the remote sensor
% ; area of the amplifier. Also avoid blocking
Indicates that power Indicates that Tape 2 has the line of sight between amplifier and
cord is connected to an been selected. In this case, remote.
AC receptacle and that only the output of the tape
the unit is switched off. deck connected to the The control unit is powered by two AA
TAPE 2 jacks can be heard. batteries, included with your amplifier.
When you replace weak batteries,
replace both at the same time. When the
remote is to be unused for an extended
period, remove the batteries to prevent
damage from corrosion.