9.1
Pair Sound + Charge Subwoofer and Center Channel
a. Ensure Sound + Charge Subwoofer LED is flashing.
b. With the Center Channel powered on, hold the Input and + buttons simultaneously for 3
seconds to enable pairing. Release buttons when the Center Channel front LED starts to flash.
c. A “water-drop” tone will play and the Subwoofer LED will turn o when pairing is successful.
Pair Subwoofer and Flip Over
Step
9
9.2
Flip Seat Frame Over
a. Flip over Seat Frame(s) with Subwoofer(s) installed.
9.3
Lay Down Shoes
a. Lay down Shoes to know where to lay out cables.
TV
Power
Wall
25
LED
Standard Seat Configuration
Deep Seat Configuration
Installation
To Next Page
Loading...
