4.1 使用螺絲起子，依次鎖付 Mid Woofer 4PCs
螺絲(3*14.2MM)
Tightens 4 screws by using the T10 screwdriver.
4.2 注意: Mid woofer 正面鼓膜不可觸碰、撞
傷
Note: Do not damage and touch the Mid woofer
5. 撕除 Gasket 離型紙，貼付在 Soft Dome
Tweeter 背面磁鐵上，居中貼付；
注意：Soft Dome Tweeter“耳朵”對準缺口處
Tears off linear of adhesive from gasket and stick
on the back of Soft Dome Tweeter.
6. 取 Speaker Plate 裝在 Soft Dome Tweeter 上
，使用螺絲起子，依次鎖付 4PCs 螺絲
(3*10.2MM)
注意：Speaker Plate 小孔為定位孔，大孔為螺
絲孔
Assemble Speaker Plate on the Soft Dome
Tweeter and tightens 4 screws by using the T10
screwdriver.
Mid Woofer
膠圈
2
1
3
4
To Next Page
Loading...
