Harman Kardon SIGNATURE 1.5 User Manual

Technical Specifications
12
Signature 1.5
Power Output:
High-Current Capability:
Frequency Response:
Power Bandwidth:
THD/IMD:
Crosstalk
Negative Feedback:
Input Impedance:
Input Sensitivity:
Remote Trigger Voltage:
Remote Trigger Impedance:
Dimensions (H x W x D):
Weight:
Power Requirements:
2 x 200 watts @ 8 ohms
20Hz – 20kHz, <0.03% THD, Both Channels Driven
1 x 650 watts @ 8 ohms
20Hz – 20kHz, <0.03% THD, Bridged Mono Mode
2 x 325 watts @ 4 ohms
20Hz – 20kHz, <0.03% THD, Both Channels Driven
± 130 Amps
<1Hz – 170kHz ± 3dB
<1Hz – >100kHz
<0.03% at rated output
< –87dBr between any two channels at
maximum output
<25dB
33K ohms
1 volt for rated output
6 – 12 volts DC (tip of plug must be “positive” (+))
20K ohms
7
1
⁄2 x 17
1
⁄4 x 15
1
⁄4 inches
191 x 438 x 387 mm
47 lbs/21 kg
120VAC, 60Hz
600 watts, maximum
All features and specifications are subject to change without notice.
Signature 1.5 Bridgeable Two-Channel Amplifier Specifications
Sig 1.5 om (b) 9/17/98 10:33 AM Page 12

Harman Kardon SIGNATURE 1.5 Specifications

General

Brand	Harman Kardon
Model	SIGNATURE 1.5
Category	Amplifier
Language	English