Harman JBL BAR 5.1 - Product Specifications; General Specifications; Input and Output Ports; Bluetooth Specification

10
Dismantling of the 463341, MAIN PCBA
1) Loosen 4 pcs screws at the Rear Housing as shown in fi gure 22 to remove the463341, Main PCBA.
4
1
2
3
Figure 22
Dismantling of the 463341, INSERT COVER ASS’Y
1) Loosen 2 pcs screws at the Rear Housing as shown in fi gure 23 to remove the463341, Insert Cover Ass’y.
Figure 23
2
1
Dismantling of the 463341, JACK & KEY PCBA
1) Loosen 4 pcs screws at the Sealing Cover as shown in  gure 24 to remove the Sealing Cover .
2) Loosen 2 pcs screws as shown in  gure 25 to remove the Jack PCBA.
3) Loosen 1 pcs screw as shown in  gure 26 to remove the KEY PCBA
1
1
2
1
2
4
3
Figure 24
Figure 25
Figure 26
DISASSEMBLY INSTRUCTIONS (Subwoofer)
Dismantling of the Real Panel ASS’Y
1) Loosen 8 pcs screws as shown in  gure 27 to remove the Real Panel Ass’y.
Figure 27
1
6
5
7
4
8
2
3
Dismantling of the LED&JACK PCBA
1) Tear off the PC Sheet & Sponge EVA as shown in  gure 28.
2) Loosen 3 pcs screws on the top of Led & Jack PCBA as shown in  gure 29 .
1
3
2
Figure 29
Figure 28
Dismantling of the AMP & SUB POWER PCBA
1) Loosen 4 pcs screws on the top of AMP PCBA as shown in  gure 30 .
2) Loosen 4 pcs screws on the top of SUB Power PCBA as shown in  gure 31 .
2
3
4
1
1
3
2
4
Figure 30
Figure 31