88
5 CONNECT
5.1 Connection with your TV and digital devices
For audio playback through the soundbar, connect the soundbar
with your TV through the supplied HDMI cable or an optical cable
(sold separately).
An HDMI connection supports digital audio and video with a
single connection. HDMI connectivity is the best option for your
soundbar.
TV (HDMI ARC)
(Recommended connection for the best Dolby Atmos experience)
HDMI IN
HDMI OUT
TV eARC/ARC
HDMI OUT
HDMI (ARC)
*
1. Connect the soundbar with the HDMI IN (ARC) connector on
your TV by using the supplied HDMI cable.
• On your TV, check that HDMI-CEC and HDMI ARC have
been enabled. Refer to the owner’s manual of your TV for
more information.
2. Use an HDMI cable (V2.0 or later) to connect the soundbar
with your digital device, such as a set-top box, DVD/Blu-ray
player or game console.
• On your digital device, check that HDMI-CEC has been
enabled. Refer to the owner’s manual of your digital
device for more information.
• On your digital device, select “Bitstream” or “Raw data”
in the audio output settings for the best Dolby Atmos
experience.
3. To play audio from the digital device connected to the
soundbar, select on the remote control.
NOTES:
− If your TV does not support HDMI eARC, make sure that you connect
your digital device through the HDMI IN connector on the soundbar
instead of your TV. Otherwise, the Dolby Atmos information cannot
pass through the HDMI (ARC / eARC) connectors to the soundbar.
To Next Page
Loading...
