Why is my Harman speaker signal distorted and loud with the PEAK light on?
The signal may sound distorted and very loud, and the PEAK light might be frequently lit because the input signal is too high, exceeding what the Harman speakers can handle. To resolve this, reduce the output level from the source, lower the level controls on the speaker, or consider using additional VE speakers.
Why is my Harman speaker signal distorted at moderate volumes?
If the signal from your Harman speaker sounds distorted even at moderate volumes and the LIMIT light is not lit, the mixer or another source might be overdriven. Consult the owner’s manual for your mixer to adjust controls such as input sensitivity (gain), channel faders, and master faders. Then, review the instructions in the Quick Start section of this guide.
How to fix hum or buzz in Harman JBL IRX108-BT that changes with mixer level?
Discusses risks of prolonged exposure to high sound pressure levels (SPL).
Warnings about fire/shock risks, naked flames, and earthing connections.
Warns against opening the unit due to hazardous voltages and life-threatening components.
Advises caution against prolonged listening at high volumes to prevent hearing damage.
Instructions on connecting power, engaging the unit, and basic controls.
Guidance on plugging audio devices into the speaker's input jacks.
Details on setting channel gain, master volume, and EQ presets.
Steps to pair a Bluetooth device for audio streaming.
Explains the EQ preset button and indicator LEDs for sound shaping.
Details the CH1 and CH2 gain knobs for input signal level adjustment.
How to use the Soundcraft-designed ducking for attenuating music during speech.
Instructions on activating and resetting the dbx AFS system.
Guide to pairing a device with one IRX speaker for audio streaming.
Process for establishing a stereo link between two IRX speakers.
Completing the stereo pairing and confirming successful connection.
Steps to pair two speakers for stereo sound via Bluetooth.
To Next Page
General