Harman JBL IRX112-BT - Page 8

8
POWER IT ON
1. Connect the power cord to the Power Receptacle (L).
2. Press the Power Standby [H] switch for .5 of a second to
engage power.
PLUG IN THE INPUTS
1. Turn the Master Volume Control (J) all the way to the left
before connecting any inputs.
2. Connect your devices to the Input Jacks (E).
SET UP THE CHANNELS
1. Select a Preset using the EQ Preset Selection Button (B).
2. Determine the CH1 & CH2 Gain (D] source. For
microphone set to 3 o’clock. For line source set to 9
o’clock.
3. Slowly turn the Master Volume (J) to the right until the
desired volume is reached.
PAIR BLUETOOTH
™
AUDIO
This device supports Bluetooth audio streaming.
To connect your device:
1. Turn on Bluetooth on your source device.
2. Hold the Bluetooth (I) button for 2 seconds. The LED will
blink when the IRX Speaker is in pairing mode.
3. Find the desired IRX speaker on your device and select.
QUICK SETUP GUIDE
POWER
C
B
D
F
A
G
E
H
I
K
J
Bluetooth
®
Power Standby
Automatic Feedback
Supression
Music Ducking
EQ Preset
LED Indicators
XLR-1/4” Combo
Inputs
XLR Male Loop Thru
CH1 & CH2 Gain
Bass Boost
EQ Preset Selection
Button
Master Volume
POWER
L
Power Receptacle