Harman JBL PARTYBOX 100 - Speaker Mounting and Specifications; Speaker Mounting Options; Technical Specifications

12
8.4 Speaker mounting
a) Speaker Stand
Place the ParyBox on speaker stands (sold separately) for
general-purpose sound reinforcement.
b) Using a Speaker Stand
If you have purchased speaker stands, you can place the
speakers on the stands utilizing the pole mount adaptor built
into the PARTYBOX 100 speaker cabinets.
9. SPECIFICATIONS
• Product name: PartyBox 100
• AC power input: 100 - 240 V ~ 50/60 Hz
• Built-in battery: Li-ion 2500 mAh, 14.4 V
• Power consumption: 60 W
• Sta ndby power consumption:
< 2 W with BT connecting;
< 0.5 W without BT connecting
• USB output: 5V
2.1A
• Speaker drivers: 2 woofers + 2 tweeters
• Speaker impedance: 4 Ω
• Total output power: 160 W
• Signal-to-noise (S/N) ratio: 80 dBA
• Frequency response: 45 Hz - 18 KHz (-6 dB)
• Battery charge time: 5 hours
• Battery playtime: 12 hours*
• Bluetooth version: 4.2
• Bluetooth prole: A2DP V1.3, AVRCP V1.6
• Bluetooth transmitter frequency range: 2402 - 2480 MHz
• Bluetooth maximum transmitter power: 15 dBm (EIRP)
• Bluetooth transmitter modulation: GFSK, π/4 DQPSK,
8DPSK
• Bluetooth range: Approx. 10 m (33 ft)
• USB format: FAT16, FAT32
• USB le format: .mp3, .wma, .wav
• Input sensitivity (AUX in): 370 mV rms (3.5 mm connector)
• Digital input: Bluetooth/USB -9 dBFS
• Dimension (W x H x D): 288 x 551 x 290 mm /
11.3 x 21.7 x 11.4 in
• Net weight: 9.7 kg / 21.4 lbs
*12 hrs battery playtime is only for reference and may vary
depending on music content and battery aging after numerous
charging and discharging cycles. It’s achievable with a predened
music source, light show switch off, volume level at 7 and BT
streaming source.