Harman JBL QUANTUM 350 WIRELESS - Power On and Initial Setup

- 7 -
Power on
• Slide the power switch upwards to power on the headset.
• Slide downwards to power off.
 The status LED glows solid white upon powering on.
First-time setup (for PC only)
Download from jblquantum.com/engine to gain access to
3D audio technologies.
Software requirements
Platform: Windows 7 (64 bit) / Windows 10 (64 bit) only
500MB of free hard drive space for installation
TIP:
• available on Windows only.
Software installation required.