16
12 HDMI (ARC) OPERATION
Before connecting, please disconnect power.
1. Connect as illustrated above and power on the unit.
2. Press the ARC button on remote control or press the button on unit repeatedly until
"ARC" appears on display.
3. Select AUDIO RECEIVER or turn to ARC in the SETUP menu on the TV.
4. The audio will play through the CUBE Wall Mount Stereo.
Note:
• The TV must have the ARC capability, and connected to HDMI ARC jack on the capable
TV.
• If there is no audio output (only picture) or noise when your TV is connected to the
CUBE, please check TV audio setting, and set the Digital Audio Output to "PCM"
format.
13 BLUETOOTH OPERATION
1. Power ON the unit.
2. Press the button repeatedly until "BT" appears on display and blinks. Or press BT
button on Remote Control.
3. Turn on the Bluetooth compatible device and enter pairing mode. When the Bluetooth
device nds the CUBE, "JBL CUBE" will appear on the display of the device.
4. After successfully pairing and connecting, the "BT" on display will stop blinking.
5. During playback:
~ Press the or button on the Remote Control or or button on the front panel
to skip to previous or next track.
~ Press the button on the Remote Control or button on the front panel to play or
pause.
6. To pair to another Bluetooth Device, disconnect the current paired device by pressing the
button on the front panel or on the Remote Control. The CUBE now can be discovered
by other Bluetooth devices.
Note:
After rst time pairing, the CUBE will connect to the last paired Bluetooth Device when both are
within working range.
To Next Page
Loading...
