17
14 OPERATION
Enjoy your own music via Bluetooth device outside while the other family members are playing
other sources or watching TV inside!
1. Press and hold the Zone B button on the front panel or the Remote control for 2 seconds
and release, then the displayed text "ZONE *-***" under the VOL on the screen will be
replaced by the texts "ZONE B-BT" and "ZONE A-***", which appear alternately.
2. Connect to the unit via Bluetooth by following procedures indicated in the Section
"BLUETOOTH OPERATION".
3. The currently paired Bluetooth device will play in the Zone B speakers independently of
those in Zone A.
4. Use your device's controls for volume level and content selection.
5. To cancel, press the zone B button.
Note:
• This function is not valid when the CUBE is in BT mode.
• While using this function, all the buttons on the front panel or the remote are only valid
for the CUBE device, and you need to control the playback and volume on your paired
smartphone or the similar BT transmitter devices, such as iPod, iPad, laptop, etc.
15 RESTORE FACTORY SETTINGS
By restoring the default settings dened at the factory, you remove all personalized settings
from the AURA-CUBE Wall Mount Stereo.
1. Power ON the unit.
2. Grasp the front cover, and pull it off the main unit.
3. Insert a stiff pole (e.g. straight paper clip, toothpick, etc.) into the Reset hole.
4. Press and hold the pole until all the backlights turn off, then release it.
5. Push the cover gently onto the main unit, then press it rmly.
To Next Page
Loading...
