Harman JBL VIBE 300 TWS User Manual

BT connecting
BT connected
BT not connected
(BLue)
(BLue)
(BLue)
FACTORY Reset
(Blue/
white)
Low (RED)
(GREEN)
(ORANGE)
high
mid
Low (OFF)
(WHITE)
(WHITE)
high
mid
power
on &
CONNECT
ON
1
2
fully charged
Charging
(red orange
GREEN)
Stereo Mode
rL L / R
L / R
Mono Mode
DUAL CONNECT
quick
start
guide
Charging
TECH
SPEC
Choose "JBL VIBE300TWS" to connect
Settings Bluetooth
Bluetooth
DEVICES
Now Discoverable
Connected
JBL VIBE300TWS
Manual SETUP
led behaviors
WHAT’S
IN THE
BOX
how
to
wear
FIRST
TIME
USE
TAP × 1
HOLD (2
S)
TAP × 2
TAP × 3
HOLD (5S)
TAP × 3
TAP × 1
TAP × 2
Controls
1. Stereo Mode
2. Mono Mode
L R
Seamless
automatic
switch
Bixby/Siri
®
/Others Bixby/Siri
®
/Others Bixby/Siri
®
/Others
power off
1
2
up to
RECONNECT LEFT & RIGHT FACTORY RESET
Connect to a new Bluetooth device
L R L/RL/R
Bluetooth
X
Model: VIBE300TWS
Driver size: 12 mm/ 0.47” Dynamic Driver
Power supply: 5V
1A
Earbud: 3.85 g per pc (7.7 g combined)/ 0.009 lbs per pc (0.017 lbs combined)
Charging case: 36 g/ 0.079 lbs
Earbud battery type: Lithium-ion polymer (40 mAh/ 3.85 V)
Charging case battery type: Lithium-ion polymer (500 mAh/ 3.8 V)
Charging time: < 2 hrs from empty
Music playtime with BT on: up to 6 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 32 ohm
Sensitivity: 105 dB SPL@1 kHz
Maximum SPL: 95 dB
Microphone sensitivity: -38±2 dBV/Pa@1 kHz
Bluetooth version: 5.2
Bluetooth profile version: A2DP V1.3 AVRCP V1.6 HFP V1.7
Bluetooth transmitter frequency range: 2.4 GHz - 2.4835 GHz
Bluetooth transmitter power: <12 dBm
Bluetooth transmitter modulation: GFSK, π/4–DQPSK, 8–DPSK
Maximum operation temperature: 45 °C

Harman JBL VIBE 300 TWS Specifications

General

Brand	Harman
Model	JBL VIBE 300 TWS
Category	Headsets
Language	English

Summary

What's In The Box

How To Wear

First Time Use

Power On & Connect

Dual Connect

Controls

Stereo Mode Controls

Details touch controls for playback, calls, and voice assistant in stereo mode.

Mono Mode Controls

Details touch controls for playback, calls, and voice assistant when using a single earbud.

Power Off

Manual Setup

Connect to New Bluetooth Device

Guide to pairing the earbuds with a new Bluetooth-enabled device for initial connection.

Reconnect Left & Right Earbuds

Instructions on re-establishing connection between left and right earbuds if they become unpaired.

Factory Reset Procedure

Steps to reset the earbuds to their original factory settings, resolving potential connectivity issues.

Charging Instructions

LED Behavior Guide

Technical Specifications