MC-10/RV-9/RV-6 Software Release Notes
– 2 –
Lexicon, 8500 Balbao BLVD, Northridge, CA 91239
20187: IP/RS232 messages clash if inputs are switched too quickly
20190: No audio if no display is connected & HDCP applied by source
20192: Implement IMAX Enhanced
20196: PCM5.1+Dirac+heights but with no upmixer enabled audio artefacts present
20197: IP messages can be lost if volume is spun quickly for extended periods
20198: Legacy DTS + Dirac with no centre speaker can lose dialogue information
20200: If unit in mute when going into standby, RS232 mute message on turn on is incorrect.
20202: L7i option missing from mode / None option missing from Ext mode in non-English languages
Note: Updating will clear your Dirac setup – it is required that you re-run the Dirac capture.