Harobot HRB-E0110Q - Page 12

Harobot
measures must be taken, such as relocating the equipment or moving it to other environment.
in the frequency range of 150k-80mhz, the field strength should be less than 3V / m.
Table 4
Recommended distance between this device and portable / mobile RF communication device
This equipment can be used in the electromagnetic environment where RF interference is
controlled. In order to avoid electromagnetic interference, customers or users should keep the
minimum recommended distance between this equipment and portable / mobile RF communication
equipment. The following recommended distance is calculated based on the maximum output
power of the communication equipment.
Rated maximum
output power of
transmitter
（
W
）
Calculate the isolation distance (m) according to the RF of transmitter
150kHz -2MHz
d=1.2X
P
150kHz -2MHz
d=1.2X
P
800MHz -2.5GHz
d=1.2X
P
0.01
0.12
0.12
0.23
0.1
0.37
0.37
0.74
1
1.17
1.17
2.34
10
3.69
3.69
7.38
100
11.67
11.67
23.34