Harobot HRB-E0110Q - After-Sale Service; Electromagnetic Compatibility

Harobot
size
150mmx80mmx45mm
weight
153g
Measurement Distance
3-15cm
[Explanation of figures and symbols used in labels]
[After-sale service]
The service life of this product is 2 years, and 1 year free maintenance service is provided.
Note: no free maintenance service will be provided for any damage caused by user's personal fault
or unauthorized disassembly.
[Electromagnetic compatibility]
The infrared thermometer complies with EMC test standard YY0505-2012。
Table 1
Guidance and Statement on Electromagnetic Launching-Non-Life Support Equipment and Systems
The equipment shall be used in the specified electromagnetic environment, and the customer or
user shall ensure that the equipment is used in the following specified electromagnetic environment
Launch test
Compliance
Electromagnetic Environment-Guidelines
radio-frequency emission
CISPR 11
Group 1
This device uses RF energy only when running its
internal functions
radio-frequency emission
CISPR 11
Group B
This equipment is suitable for families and directly
connected to residential public low voltage power
supply network.
Harmonic radiation
IEC61000-3-2
Not
applicable
Voltage Fluctuation and
Scintillation Radiation
Not
applicable
Note, refer to attached documents
Represents type B application part