EasyManua.ls Logo

Harris FALCON III - Page 131

Default Icon
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
129
SINCGARS Options (1)
R BAT SNCGR DIG VINSON CT
LOCK KEYPAD
RADIO OPTIONS
SINCGARS OPTIONS
R BAT SNCGR DIG VINSON CT
RETRANSMIT ROLE
SINCGARS GTOD
R BAT SNCGR DIG VINSON CT
GPS SYNCHRONIZATION
USER ENTRY
R BAT SNCGR DIG VINSON CT
GLOBAL TIME OF DAY
PRESS ENT KEY TO MODIFY
54D 04 : 26 : 23
R BAT SNCGR DIG VINSON CT
SINCGARS GTOD
GPS SIGNAL MISSING
PRESS CLR / ENT TO EXIT
R BAT SNCGR DIG VINSON CT
SINCGARS GTOD
SUCCESSFUL
PRESS CLR / ENT TO EXIT
GPS SYNCHRONIZATION
USER ENTRY
7 STU
OPT
•Press 7/OPT button and select SINCGARS OPTIONS. There are three options:
SINCGARS GTOD, RETRANSMIT ROLE, and SQUELCH. SINCGARS GTOD is
available when OP MODE is set to Frequency Hopping. SQUELCH is available
in Single Channel OP MODE. RETRANSMIT ROLE is available in both.
• To set the time select SINCGARS GTOD. There are two choices: USER
ENTRY and GPS SYNCHRONIZATION.
• If USER ENTRY is selected, press ENT again to modify the GTOD. Type
in the Julian Day, arrow over and type in the hours, minutes, and seconds
from an accurate time source. The next time ENT is pressed the GTOD
clock will start.
• If GPS SYNCHRONIZATION was selected there are two possible
screens: SUCCESSFUL or GPS SIGNAL MISSING. The GPS is
defaulted to sleep after 15 minutes of use and needs to be woken for GPS
SYNCHRONIZATION to be successful.

Related product manuals