Need help?Do you have a question about the Harris FALCON III and is the answer not in the manual?
Understand the terminology and operation of the AN/PRC-117G.
Avoid contact and prolonged proximity exposure to transmitting antennas.
Guidelines for safe handling, disposal, and charging of batteries.
Advisories on unauthorized frequencies, connector damage, and CCI.
Details the radio's capabilities, frequency range, and supported waveforms.
Highlights features like net presets, BIT, GPS, HUB, squelch, and waveform types.
Details LOS, FM modulation, channel spacing, power, and specific waveform support.
Details LOS, FM/AM modulation, spacing, power, and waveform support.
Details SATCOM, DAMA, modulations, power, and data rates.
Details ANW2 high speed data, channel spacing, power, and encryption.
Identifies and describes the radio's connectors and interface ports.
Explains the function of each button and navigation key on the keypad.
Procedure for installing and replacing the memory hold-up battery.
Always available options like Data Mode, GPS Options, Lock Keypad, etc.
Perform diagnostic tests for radio modules and functions.
Configure VULOS, SINCGARS, HPW, HAVEQUICK, and DAMA settings.
Overview of embedded encryption devices and their compatibility.
Procedures for loading and zeroizing COMSEC keys using fill devices.
Covers ground-to-ground FM communications and emergency aircraft frequencies.
Step-by-step guide to programming LOS fixed frequency presets.
Explains the radio's main operational screen displays and indicators.
Covers band, spacing, frequencies, hopping rate, COMSEC, ECCM, and TSK.
Procedures for loading SINCGARS FH data using various fill devices.
Displays SINCGARS operational screens for FH and SC modes.
Explains HPW waveform and Wireless Messaging Terminal (WMT).
Step-by-step guide for programming HPW operation.
Configure HPW Time of Day and wireless network settings.
Explains Demand Assigned Multiple Access principles and benefits.
Guides through programming DAMA channels for 25 kHz and 5 kHz.
Shows DAMA operational screens, including crypto mode, network status, and channel info.
Understand and perform OTAR operations on the AN/PRC-117G.
Procedure for transmitting Manual Over-the-Air Rekey (MK OTAR).
Procedure for receiving Manual Over-the-Air Rekey (MK OTAR).
Introduction to the CPA software and its shortcut for radio planning.
Steps to create networks, add radios, and configure parameters in CPA.
Process for generating, installing, and activating mission plans on the radio.
Understand and activate ANW2 Mission Plans on the AN/PRC-117G.
Details ANW2 bandwidths, data rates, network conditions, and range.
Explains ANW2 operational screen indicators and settings.
Configure ANW2 Time of Day, wireless settings, and network statistics.
Guides through programming ANW2 presets, interfaces, and network settings.
To Next Page
General
