216
Plan Validation
• Then next step is to validate the communications plan
Warnings
Additional
information on
the warning
•Click on the Validate Plan button near the top center. A new tab will be added
over the network tab called (Plan Validation Results)
• The Plan Validation Results can contain Warnings denoted by a red circle with a
white X, Advisories denoted by a yellow triangle with a black exclamation point,
and Messages denoted by a white circle with a blue lower case i.
• By selecting a Warning, Advisory, or a Message; additional information may be
displayed in the lower right in the properties window. Here for example two
radios have the same Red Ethernet Address.
• Errors should be fixed prior to programming the radio. If the errors have not
been fixed, the programming window will advise that there are still errors and
give you a choice to continue or not.
• Once any Errors or Warnings have been fixed, the plan must be re-validated for
the Plan Validation Results tab to remove the errors.
To Next Page
Loading...
