Need help?Do you have a question about the Harris Constellation and is the answer not in the manual?
Information on factory-trained staff providing telephone support for complex customer equipment issues.
Criteria for selecting a suitable location for the equipment rack, considering lighting and ventilation.
Step-by-step instructions for checking and unpacking equipment to ensure it is undamaged.
Lists necessary tools and test equipment required for installation and maintenance.
Guidelines for proper grounding of the equipment and rack for safety and operation.
Detailed procedures for powering up the Constellation radio system.
Step-by-step instructions for the physical installation of the Constellation radio.
Guidelines and diagrams for connecting various interfaces and cables.
Procedures for measuring and adjusting the transmitter's output power.
Steps for properly aligning the system's antenna.
Safety warnings and important considerations before performing loopback tests.
Procedures for conducting loopback tests on DS1 tributary interfaces.
Procedures for conducting loopback tests on DS3 and 4xDS3 interfaces.
Accessing and configuring system-wide settings via the keypad.
Configuring the capacity usage for DS3 and 4xDS3 interfaces.
Setting transmit power levels using the Automatic Transmitter Power Control feature.
Configuring the Add-Drop Multiplexer (ADM) settings.
Configuring the tributary interfaces for signal transmission.
Configuration of IP routing tables for network access and data flow.
Setting up and configuring the SNMP agent for network management.
Details on available ports for network management connectivity.
An example of a basic SNMP network configuration setup.
An example of an advanced SNMP network configuration setup.
Basic checks for maintaining optimal radio operation and performance.
Procedures for measuring and calibrating the transmitter's operating frequency.
Procedures for measuring and adjusting the transmitter's output power.
Procedures for measuring and calibrating the receiver's operating frequency.
Information on where and how to acquire new system software.
Step-by-step procedures for downloading and installing software updates.
Establishing the necessary computer connection for software transfer.
Executing the software download process using the utility.
Instructions for activating the downloaded software immediately.
Procedures for rebooting the system after software changes.
Initial troubleshooting steps and checks to perform before deeper analysis.
Guidance on interpreting system alarms to identify fault origins.
Definitions, causes, and possible actions for system alarms.
Safety measures and handling precautions for working with field-replaceable modules.
List of required tools and test equipment for unit replacement procedures.
Steps for safely opening and removing the equipment doors for access.
Procedures for removing and installing the transmitter assembly.
Procedures for removing and installing the receiver assembly.
Procedures for removing and installing the power supply unit.
Procedures for removing and installing the modem unit.
Procedures for removing and installing the SPU controller unit.
Procedures for removing and installing the M12 unit.
Information on how to order replacement parts and units.
Procedures and policies for returning equipment for repair services.
Overview of technical assistance services and contact information.
Detailed explanation of the product warranty terms and conditions.
Wiring diagrams and cable specifications for connecting to other radio units.
Pin assignments for alarm inputs and output connectors.
Specific interface details for high capacity Constellation models.
Using the keypad or terminal emulation for system configuration.
Navigational structure and hierarchy of the keypad menus.
Detailed alarm status, messages, and configuration options.
Control functions including switching, locking, and muting.
Accessing and modifying various system configuration parameters.
Advanced settings for RF parameters and calibration.
Compatibility information for different transmitter assembly models.
Compatibility information for different receiver assembly models.
Compatibility information for different modem assemblies.
Compatibility information for various High Level Mux assemblies.
Overview of Service Channel operation in loop systems.
Description of various loop system configurations.
Configuration details for nested loop systems.
Configuration details for independent, separate loop systems.
Description of the structure and meaning of Harris part numbers.
Explanation of the structure and components of a 12-digit part number.
To Next Page
General
