Harris Corporation Constellation™
CONFIGURING THE
CONSTELLATION
RADIO
C HAPTER
5
CONFIGURING THE
CONSTELLATION RADIO
Refer to the Quick Reference Card or Appendix B for
Keypad information.
SYSTEM from the CONFIGURATION
Submenu
3DS3 (4DS3) CAPACITY USE
For a Constellation Radio with an HLM-3xDS3 unit or HLM-4xDS3, there are
three channel configurations from which to select. Select DS3 only, select any
DS3 channel to drop to 28 T1, or select any DS3 channel for a partial add-drop
(4 T1, 8 T1, 12 T1, or 16 T1).
Only the first three channels of the 4DS3 unit can be
selected for add/drop so the 3DS3 submenu is used.
To Next Page
Loading...
