Harris Constellation - TRIBUTARIES from the CONFIGURATION Submenu; Table 5-8: TRIBUTARIES Submenu

To Next Page

To Previous Page

Constellation™ November 2003

5-10 Configuring the Constellation Radio

TRIBUTARIES from the CONFIGURATION

Submenu

Table 5-8: TRIBUTARIES Submenu

TRIBUTARIE

S Submenu

Selection Explanation

ENABLE

DS-1, 2, 3, 4

TRIBUTARY A1 TO 28

TRIBUTARY B1 TO 16

WAYSIDE

Choose ENABLE or DISABLE for

each tributary.

This command only masks the

alarm of the disabled tributary.

CODE

TRIBUTARY A1 TO 28 CODE

TRIBUTARY B1 TO 16 CODE

Select the appropriate line

code for each tributary used.

AMI or B8ZS, HDB3

WAYSIDE CODE

AMI or B8ZS

AMI or B8ZS, HDB3

EQUALIZER

This item is compensation for

cable length between

customer’s equipment and the

radio equipment. It is

applicable to DS signals.

DS3 EQUALIZER For a DS3 signal.

DS3-1, 2, 3, 4 EQUALIZER

For 4xDS3 & 3xDS3 signals: for

each T3 tributary, select the

range in feet.

TRIB EQUALIZER

Select the appropriate range in

feet for each tributary.

For an E1 signal: select E1 for

each tributary. Range in feet is

not available for E1.

WAYSIDE EQUALIZER

For a DS1 signal, select the

appropriate range in feet.

For an E1 signal, select E1

UNBALANCED or E1

BALANCED.

Main Page

Harris Constellation - TRIBUTARIES from the CONFIGURATION Submenu; Table 5-8: TRIBUTARIES Submenu

Table of Contents

Other manuals for Harris Constellation

Related product manuals