Harris Constellation - Turning on the Radio; Table 3-5: Turn-On Procedures

Constellation™ November 2003
3-8 Installation and Commissioning
Turning on the Radio
Do not continue until the radio has warmed up
(about 1 hour).
Table 3-5: Turn-on procedures
Step Procedure
For Details,
Go To
1
Ensure that the correct fuses are installed in the Fuse
Panel.
page 3-24
2
Turn on the power. page 3-24
3
Turn on the Power Supply switch. page 3-24
4
Ensure that the antenna port is terminated into a
dummy load or the antenna system before turning on
the TX switch.
5
Turn on the TX switch on the Transmitter Assembly. page 3-24