To Next Page
A
anaperezAug 2, 2025
How to report talk group, system configuration, or RF coverage issues with my Harris Radio?
- SShelley CarrAug 2, 2025
Contact your management to report the issue.
How to report talk group, system configuration, or RF coverage issues with my Harris Radio?
Contact your management to report the issue.
Why is there a slight delay in audio on my Harris M7300?
A slight audio delay is inherent in all digital communications, and it's most noticeable when radios are in very close proximity.
What to do if my Harris M7300 Radio fails or shows an unexplained error code?
Contact your management to report the issue.
What to do if I have physical equipment issues with my Harris M7300 Radio?
Contact your management to report the issue.
General| Channels | 1000 |
|---|---|
| GPS | Optional |
| Operating Modes | Analog, Digital (P25) |
| Encryption | DES, AES |
| Weight | 1.3 kg |
| Modulation | FM |
| Operating Temperature | -30°C to +60°C |
Advises against operating near people, with loose connectors, during blasting, or in explosive atmospheres.
Details the steps to make a group call, including selecting the group and using the PTT button.
Explains how to identify incoming group calls, view caller ID and talk group, and respond.
Explains how to activate an emergency alert by pressing and holding the EMERGENCY button.
Describes how the radio indicates an incoming emergency transmission, showing caller ID and alert status.
Outlines the steps to clear an emergency state, typically by pressing the CLEAR and EMERGENCY keys.
Details how to activate or deactivate the scan function using the SCAN button, indicated by a scan icon.
Instructs users to turn scan off before creating or editing a Scan List.
Guides on adding a talk group to the scan list, indicated by an 'S' and priority icon.
Explains how to designate groups as Priority 2, shown by a '2' and 'II' icon.
Details how to set a group as Priority 1, indicated by a '1' and 'I' icon.
Describes how to remove groups from the scan list using the scan ramp control.
Step-by-step guide to initiate a private call to a specific radio unit using the MENU and RAMP CONTROL.
Explains how the radio displays incoming individual calls, showing caller ID and indicating an individual call.
Provides guidance on resolving common issues encountered with the radio system.
