ECP-3406 page 33
Group Call Scanning
The radio is able to monitor multiple groups, but the radio can only receive
one group at a time
The radio can scan only those groups on a “Scan List”
This list can be programmed by the user, or
The list may be directly programmed into the radio by the Network
Administrator
Turning the Scan function On or Off can be:
Fixed in programming by the Network Administrator, or
Controlled by the radio user
Radio can have up to two “Priority Talk Groups” designated
Priority 1 Talk Group
Priority 2 Talk Group
Priority Talk Groups can be assigned by the radio user, or they might be
fixed in the programming by the Network Administrator
The radio will be extracted from listening to a scanned call if a call with a
higher priority is received
To Next Page
Loading...
