200
Operation Successful
Tell outstations to prepare for MK
Press Finish to initiate MK operation
Load original KEK
back to NCS?
OTAR Operations (TX MK) (4)
If using an AN/PYQ-10 SKL:
7. At the Select a replacement TEK: screen, select the new TEK that needs to be
transmitted to the receiving stations, press Next>>
8. Pre-steps MK-RV Operation, press Finish, the MK OTAR is transmitted.
9. If no errors the SKL displays Operation Successful.
10. Press OK, then Finish.
11. The SKL give you the option to send the key again. Select No.
12. Load original KEK back to NCS?, select No.
To Next Page
Loading...
