Harris FALCON III - Main Operational Screens

77

Main Operational Screens (1)
R BAT VULOS TON VINSON CT
05 - FM LOS 1
LOS VOC FM --- 01
TYPE TRF MOD CHAN KEY
TX/RX Indicator
BAT/VOL meter
Waveform
Type
Squelch
Indicator
Crypto
Type
Cipher
Type
Next Indicator
RX / TX Power
Preset # and Name
Preset Type
Traffic Type
Modulation Type
Channel #
Crypto Key
•TX/RX Indicator: T for Transmit, R for Receive. Some Waveforms can
automatically transmit.
• BAT/VOL meter: BAT: Battery meter displays by default and has five levels.
VOL: Volume meter is display for four seconds when volume up/down is pressed.
VAA indicates the radio is connected to a Vehicular Amplifier Adapter.
• Waveform Type: VULOS, SNCGR, HPW, etc.
• Squelch Indicator: TON, NOI, DIG, TCS, DCS, or BSY. It is waveform specific.
• Crypto Type: VINSON, ANDVT, MEDLEY, etc. PT RX is displayed indicating
Plain Text Override; receiving PT while in CT.
• Cipher Type: PT, CT, LD or ---
• Preset # and Name: Current System Preset (Can be over-ridden).
• Next Indicator: Indicates more than one screen is available. Press the 0 or
circle arrow button to change screens.
• RX/TX Power: Displays transmit power level or receive signal detected level.
Fills bottom to top for TX and left to right for RX.
• Preset Type: LOS or SAT (Can be over-ridden).
• Traffic Type: Voice or Data (Can be over-ridden).
• Modulation Type: Below 90 MHz, FM only (Can be over-ridden above 90 MHz).
• Channel Number: Satcom channel number only (Can be over-ridden in
Satcom).
• Crypto Key: 01 to 25 (Can be over-ridden).