124
Program SINCGARS
System Presets (1)
8 VWX
PGM
PGM
RADIO CONFIG
HAVEQUICKII CONFIG
SYSTEM PRESETS
PGM – SYS PRESETS
RESET SYSTEM PRESET
SYSTEM SCAN CONFIG
SYSTEM PRESET CONFIG
PGM – SYS PRESETS - CFG
SYSTEM PRESET NUMBER
5-<EMPTY>
ENTER 01 – 99 / PRE + / -TO SCROLL
0
PGM – SYS PRESETS – CFG - 05
PRESET DESCRIPTION
NSERT DESCRIPTION
ENTER DESCRIPTION
I
PGM – SYS PRESETS – CFG - 05
PRESET WAVEFORM
TO SCROLL / ENT TO CONT
SINCGARS
CLR
X 2 or
. . – SYS PRESETS – CFG – 05 - SINCGARS
OPMODE
TO SCROLL / ENT TO CONT
FREQUENCY HOPPING
. . – SYS PRESETS – CFG – 05 - SINCGARS
PRESET NAME
NGRS02
ENTER PRESET NAME
S
. . – SYS PRESETS – CFG – 05 - SINCGARS
CRYPTO KEY
TO SCROLL / ENT TO CONT
TEK01
•Now that the SINCGARS Configuration is complete the System Presets can be
programmed.
• From the HOPSET/LOCKOUT menu, press the CLR button twice. If you have
exited the programming menu, press the PGM button.
• Select SYSTEM PRESETS
• Select SYSTEM PRESET CONFIG
• Select a SYSTEM PRESET NUMBER
• Enter a PRESET DESCRIPTION (Optional)
• Select SINCGARS for PRESET WAVEFORM
• There are two choices for OPMODE, FREQUENCY HOPPING and
SINGLE CHANNEL. The following menus are the same no matter what is
selected here. Select FREQUENCY HOPPING.
• Enter a PRESET NAME (Optional)
• Select the CRYPTO KEY. SINCGARS is always VINSON so only the
Key position needs selected.
To Next Page
Loading...
