123
Program SINCGARS Configuration (2)
PGM - SINCGARS
MASTER / MEMBER
CUE CONFIGURATION
HOPSET / LOCKOUT
PGM - SINCGARS HOP / LOCKOUT
VIEW HOPSETS
VIEW LOCKOUTS
COPY HOPSET
PGM – SINCGARS – HOP / LOCKOUT - COPY
COPY HOPSET FROM
TO SCROLL / ENT TO CONT
01 [ F300 ]
PGM – SINCGARS – HOP / LOCKOUT - COPY
COPY HOPSET TO
ENTER 01 TO 25
07 [ EMPTY ]
PGM – SINCGARS – HOP / LOCKOUT - COPY
NEW HOPSET ID
F456
ENTER 000 TO 999
PGM - SINCGARS HOP / LOCKOUT
COPY HOPSET
VIEW LOCKOUTS
VIEW HOPSETS
. . SINCGARS - HOP / LOCKOUT - HOPSETS
01 - F300
02 - F100
03 - F200
. . SINCGARS - HOP / LOCKOUT - HOPSETS
07 - F456
08 - EMPTY
09 - EMPTY
•HOPSET / LOCKOUT menu is used to change Net IDs and view Net IDs. It is
recommended that the operator set the Net IDs prior to programming the System
Presets!
• Select HOPSET / LOCKOUT
• COPY HOPSET is used to change the Net ID in a Hopset Compartment and to
create additional Net IDs in the empty compartments.
• Select COPY HOPSET
• At COPY HOPSET FROM, scroll
to select a compartment, press ENT.
Only filled compartments can be selected.
• At COPY HOPSET TO, type the compartment number you wish to create
the Net ID in (01 to 25), press ENT. COPY HOPSET TO defaults to the
first empty compartment.
• At NEW HOPSET ID, enter the 3 digit Net ID. Repeat to create more Net
IDs.
• Select VIEW HOPSETS and scroll down to view what Net ID is in what
compartment.
To Next Page
Loading...
