Harris FALCON III - Page 139

137

SINCGARS Error Screen
R BAT SNCGR DIG VINSON CT
PRESET CONFIG ERROR
HOPSET NOT FOUND
PRESS CLR / ENT TO CONTINUE
R BAT SNCGR DIG VINSON CT
** ERROR **
NO HOPSET FILLED
PRESS CLR / ENT TO EXIT
R BAT SNCGR DIG VINSON CT
** NO HOPSETS **
**** FILLED ****
PRESS CLR / ENT TO EXIT
R BAT SNCGR DIG VINSON CT
** NO LOCKOUTS **
**** FILLED ****
PRESS CLR / ENT TO EXIT
R BAT SNCGR DIG VINSON CT
05 – SNGRS02 FH
VOC - - - - F--- TEK01
TRF DATA NET ID KEY
R BAT SNCGR DIG VINSON CT
--D --: --: --
- - F- - - OFF NONE
CMP NET ID LNE RATE
•Here are some SINCGARS error screens that may be encountered when
programming the radio before the SINCGARS Loadset has been loaded.
• (PRESET CONFIG ERROR HOPSET NOT FOUND) when selecting a
SINCGARS System Preset.
• (ERROR NO HOPSET FILLED) when selecting Copy HOPSET.
• (NO HOPSETS FILLED) when selecting View HOPSETS.
• (NO LOCKOUTS FILLED) when selecting View LOCKOUT.
• The first Operational screen no Net ID is shown
• The second Operational screen (no TOD, Compartment, or Net ID)