Harris FALCON III - Page 142

140

Retransmission Configuration (1)
R BAT SNCGR DIG - - - - - - PT
SINCGARS ROLE
RETRANSMIT ROLE
R BAT SNCGR DIG - - - - - - PT
RETRANSMIT ROLE
TO SCROLL / ENT TO CONT
RETRANSMIT STATION
R BAT SNCGR DIG - - - - - - PT
RETRANSMIT ROLE
TO SCROLL / ENT TO CONT
SAME NET ID-RX ONLY
R BAT SNCGR DIG - - - - - - PT
RETRANSMIT ROLE
TO SCROLL / ENT TO CONT
SAME NET ID-TX ONLY
R BAT SNCGR DIG - - - - - PT
05 – RXMT F456 FH
DAT SYNC F456 - - - - -
TRF DATA NET ID KEY
R BAT SNCGR DIG - - - - - PT
05 – RXMT RX FH
DAT SYNC F456 - - - - -
TRF DATA NET ID KEY
R BAT SNCGR DIG - - - - - PT
05 – RXMT 35.9 SC
DAT SYNC ---- -----
TRF DATA VOICE KEY
R BAT SNCGR DIG - - - - - PT
05 - RXMT F456
•Program each AN/PRC-117G with the required SINCGARS retransmission plan.
• Perform a communications check on each AN/PRC-117G and establish CT
communications with distant radio stations in each net.
• Turn off radios and connect the retransmission cable to both radios.
• Turn on both radios and set the Cipher switches to PT.
• Press OPT button, select SINCGARS OPTIONS then RETRANSMIT ROLE.
• For Black Digital, select RETRANSMIT STATION on both radios. For Range
Extension, select SAME NET ID-RX ONLY on one radio and SAME NET ID-TX
ONLY on the second radio. Exit the Options menu.
• The radio will display RXMT on screen. The Traffic mode is now Data.