Harris FALCON III - Page 151

149

HPW Programming (3)
PGM – SYS PRESETS – CFG – 07 – HPW
CRYPTO KEY
TO SCROLL / ENT TO CONT
TEK01
PGM – SYS PRESETS – CFG – 07 – HPW
TRANSEC KEY
TO SCROLL / ENT TO CONT
TEK01
PGM – SYS PRESETS – CFG – 07 – HPW
NETWORK TYPE
TO SCROLL / ENT TO CONT
SAT
PGM – SYS PRESETS – CFG – 07 – HPW
HPW BAUD RATE
TO SCROLL / ENT TO CONT
UFO
PGM – SYS PRESETS – CFG – 07 – HPW
TX POWER LEVEL
TO SCROLL / ENT TO CONT
HIGH
• Select the KG-84 CRYPTO KEY position. HPW automatically uses KG-84,
therefore only the key position needs selected.
• Select the TRANSEC KEY position. The TRANSEC KEY is stored in a
SATELLITE CRYPTO MODE position.
• Select the proper NETWORK TYPE: LOS or SAT.
• There are three options for HPW BAUD RATE: UFO, WB, and NB. UFO for
25 kHz channels on UHF Follow-On satellites, WB for 25 kHz channels on
FLTSATCOM satellites, or NB for 5 kHz channels.
• Select TX POWER LEVEL. Choices are HIGH, MED, LOW & USER.