Harris FALCON III - Page 188

186

25 kHz DAMA Programming (6)
. . YS PRESETS – CFG – 07– DAMA – NET02
TRANSEC
I / O PORT CONFIG
TRAFFIC
. . TS – CFG – 07– DAMA – NET02 - TRAFFIC
TRAFFIC MODE
USE TO SCROLL
VOICE
. . TS – CFG – 07– DAMA – NET02 - TRAFFIC
VOICE MODE
USE TO SCROLL
MELP
. . TS – CFG – 07– DAMA – NET02 - TRAFFIC
DASA OPT CODE
5K SBPSK 1200 OFF
BW MOD TYPE RATE FEC
008
. . YS PRESETS – CFG – 07– DAMA – NET02
PRESET NAME
5 KHZ MESSAGE MODE
POWER
. . SETS – CFG – 07– DAMA – NET02 - POWER
TX POWER
USE TO SCROLL
0 DB FROM FULL
. . YS PRESETS – CFG – 07– DAMA – NET02
POWER
5 KHZ MESSAGE MODE
PRESET NAME
. . CFG – 07– DAMA – NET02 - PRESETNAME
PRESET NAME
AMAPRE01
ENTER ALPHANUMERIC NET NAME
D
• Select TRAFFIC
• Set the TRAFFIC MODE to VOICE. Two other choices are DATA/VOICE and
DATA.
• Select the VOICE MODE. LPC is default, MELP improves voice quality.
CVSD is the third choice.
• DASA OPT CODE allows the operator to enter a 181B option code when
Dedicated is selected instead of DAMA. Can be left at default.
• Select POWER
• There are 11 power settings: 0 to 10 dB down from full power in 1 dB steps.
In watts: 20, 16, 13, 10, 8, 6.3, 5, 4, 3, 2.5, and 2 watts.
• Select PRESET NAME and enter up to 11 alphanumeric characters.