Harris FALCON III - Page 190

188

DAMA Config (Destinations)
PGM – DAMA – DESTINATIONS - DEFINE
SELECT DESTINATION
DEST1
TO SCROLL / ENT TO CONT
01
PGM
SINCGARS CONFIG
HAVEQUICKII CONFIG
DAMA CONFIG
PGM - DAMA
DESTINATIONS
PGM – DAMA - DESTINATIONS
CLEAR DESTINATION
DEFINE DESTINATION
PGM – DAMA – DESTINATIONS - DEFINE
DESTINATION NAME
EST1
ENTER DESTINATION NAME
D
PGM – DAMA – DESTINATIONS - DEFINE
DESTINATION TYPE
TO SCROLL / ENT TO CONT
183A AC
PGM – DAMA – DESTINATIONS - DEFINE
DESTINATION ADDRESS
6414
ENTER 00000 TO 65535
5
PGM – DAMA – DESTINATIONS - DEFINE
ADD ADDRESS
EXIT
EDIT ADDRESS
• From the DAMA Net programming menu, press the CLR button twice back to
SYSTEM PRESETS.
• Scroll down and select DAMA CONFIG
• Select DESTINATIONS, then DEFINE DESTINATION
• Up to 50 Destinations can be entered and six addresses per Destination.
However, according to FORSCOM only one Destination with one address
may be entered, the Network Address. Select the first destination (01).
• Enter a name if desired. Up to 12 characters.
• If in a 25 kHz network, select 183A AC for the DESTINATION TYPE. 182A for
a 5 kHz network. If 182A, the SEARCH AREA must be set to LOCAL or
GLOBAL.
• Once an address is entered, a new menu is added. EDIT ADDRESS, ADD
ADDRESS, and EXIT. Select EXIT then press the PGM button to exit the
programming menu.