198
OTAR Operations (TX MK) (2)
Send Receive Database
sEtup Comsec Time
vG Ld Rv
Ak Mk vU
Select key qUit
USKAT1234
Connect to RT and
press [SEND ]
Transfer in progress.
Sending TEK
USKAT1234
1 key transferred.
If using an AN/CYZ-10:
Turn AN/CYZ-10 on and load RADIO application.
1. Select Comsec
2. Select MK
3. At Select key screen, use the P DN button to page down and find the correct
TEK, press the ENTR button.
4. DTD reads: Connect to RT and press [SEND ], press SEND.
5. SEND. Display will show:
[Transfer in progress],
[Sending TEK xxxxxx], then
[1 key transferred]
To Next Page
Loading...
