Harris FALCON III - Page 77

75

LOS Fixed Frequency
Programming (3)
PGM – SYS PRESETS – CFG – 07 - VULOS
TX POWER
SQUELCH
TRAFFIC
. . YS PRESETS – CFG – 07 – VULOS - TRAFFIC
TRAFFIC MODE
TO SCROLL / ENT TO CONT
VOICE
. . YS PRESETS – CFG – 07 – VULOS - TRAFFIC
FM DEVIATION
TO SCROLL / ENT TO CONT
8.0 KHz
. . YS PRESETS – CFG – 07 – VULOS - TRAFFIC
VOICE MODE
CVSD
ENT TO CONTINUE / CLR TO EXIT
. . YS PRESETS – CFG – 07 – VULOS - TRAFFIC
MODULATION TYPE
FM
PRESS ENT TO CONTINUE
PGM – SYS PRESETS – CFG – 07 - VULOS
TRAFFIC
SQUELCH
TX POWER
. . S PRESETS – CFG – 07 – VULOS - POWER
TX POWER LEVEL
TO SCROLL / ENT TO CONT
HIGH
. . S PRESETS – CFG – 07 – VULOS - POWER
USER TX POWER LEVEL
TO SCROLL / ENT TO CONT
00 DB DOWN
• Select TRAFFIC
• Set TRAFFIC MODE to VOICE. Selecting DATA allows data at 16 kbps.
• VOICE MODE cannot be edited, press ENT
• Below 90 MHz, MODULATION TYPE also cannot be edited, press ENT.
Above 90, AM is available.
• Select 8.0 KHz for FM DEVIATION. Use 6.5 KHz for SINCGARS
compatibility. 5.0 KHz is the third choice.
• Select TX POWER. Choices are HIGH (10 watts), MEDIUM (4 watts), LOW
(1 watt), and USER. User allows for 14 power levels ranging from 0 DB down
(equal to 10 watts) to 10 DB down (equal to 1 watt) from full power. Medium
(4 watts) is 4 DB down.