81
Main Operational Screens (5)
Large Font Screen
R BAT VULOS TON VINSON CT
05 – FM LOS 1
R BAT VULOS TON - - - - - - - CT
PRESET CONFIG ERROR
INVALID CRYPTO MODE
PRESS CLR / ENT TO CONTINUE
R BAT VULOS TON - - - - - - - CT
PRESET CONFIG ERROR
TEK NOT FOUND
PRESS CLR / ENT TO CONTINUE
Fourth Operational Screen
• This is the last screen of each system preset. The screen will remain on the
large font screen when changing system presets.
• The user can scroll through the complete list of system presets from any of the
screens by using the PRE + or - keys. To select a new preset, press ENT while
viewing that preset, or simply wait four seconds and the system preset will
change automatically.
• The bottom two screens are common COMSEC programming errors. Invalid
Crypto Mode indicates the Cipher Switch is in the CT position however, the
Crypto Mode was set to NONE. Move the Cipher Switch to PT.
• TEK Not Found indicates that an empty Crypto Mode or Crypto Key position
was assigned to the preset.
To Next Page
Loading...
