12
The HL77 can be connected to a Mac or Windows computer to backup or load phrases (as WAV files).
The HL77 can only accept and playback 16-bit 44.1kHz stereo WAV files.
Connect the HL77 to your computer using a mini USB cable.
Turn on the pedal by inserting a battery or connecting the power adaptor and plugging an instrument
cable into the OUT L jack.
Note: The HL77 will not operate on USB power.
The pedal display will show “
“ when it is successfully connected to the computer.
You will now be able to import WAV files to the HL77 pedal or backup the recording from the pedal to
your computer.
Importing WAV Files
1. Open the HL77 Removable Disk
2. Open the HARTKE folder
3. Open the WAV folder. In the WAV folder there are 99 folders for the 99 memory locations in the pedal
numbered W001 through W099.
To load a sample to a memory slot on the HL77
1. Select a memory number - e.g. W002
2. Rename the wav file - w002.wav
3. Drag the WAV file into the folder. The file is now successfully loaded into memory slot 02.
Connecting the HL77 to Your Computer
To Next Page
Loading...